PyroGenesis Announces 28-Day Lab Strength Tests Achieve Up to 99.56% Above Compressive Strength Target for Green Cement Additive Product

Neither the Toronto Stock Exchange, its Regulation Services Provider (as that term is defined in the policies of the Toronto Stock Exchange) nor the OTCQX Best Market accepts responsibility for the adequacy or accuracy of this press release.

For further information please contact:
Rodayna Kafal, Vice President, IR/Comms. and Strategic BD
E-mail: ir@pyrogenesis.com
http://www.pyrogenesis.com

Images accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/e7927011-62b4-476f-b155-1a2ba79ac776
https://www.globenewswire.com/NewsRoom/AttachmentNg/e9166c75-8f46-4dff-85c8-429d193036a2
https://www.globenewswire.com/NewsRoom/AttachmentNg/161e5fa6-8a35-4b6b-b695-812373c63829
https://www.globenewswire.com/NewsRoom/AttachmentNg/9a2b016c-c7be-4dff-8c19-4705685a25ef
https://www.pyrogenesis.com/wp-content/uploads/2024/04/pyrogenesis-quartz-to-amorphous-silica.png 

References
[1] Lo, F. C., Lee, M. G., & Lo, S. L. ( 2021). Effect of coal ash and rice husk ash partial replacement in ordinary Portland cement on pervious concrete. Construction and Building Materials286, 122947.
[2] Kathirvel, P., & Murali, G. ( 2023). Effect of using available GGBFS, silica fume, quartz powder and steel fibres on the fracture behavior of sustainable reactive powder concrete. Construction and Building Materials375, 130997.
[3] Uddin, M. A., Bashir, M. T., Khan, A. M., Alsharari, F., Farid, F., & Alrowais, R. ( 2023). Effect of Silica Fume on Compressive Strength and Water Absorption of the Portland Cement–Silica Fume Blended Mortar. Arabian Journal for Science and Engineering, 1-9.
[4] Sævarsdottir, G., Kvande, H., & Magnusson, T. ( 2021). Greenhouse gas emissions from silicon production-development of carbon footprint with changing energy systems. In Proceedings of the 16th International Ferro-Alloys Congress (INFACON XVI).
[5] Manjunatha, M., Preethi, S., Mounika, H. G., & Niveditha, K. N. ( 2021). Life cycle assessment (LCA) of concrete prepared with sustainable cement-based materials. Materials Today: Proceedings47, 3637-3644.
[6] Habert, G., Miller, S. A., John, V. M.,Provis, J. L., Favier, A., Horvath, A., & Scrivener, K. L. ( 2020). Environmental impacts and decarbonization strategies in the cement and concrete industries. Nature Reviews Earth & Environment1(11), 559-573.


i https://www.astm.org/c0618-12.html


Primary Logo

PozPyro Strength Activity Index (SAI) %Gain Vs. Portland Cement Table

PozPyro Strength Activity Index (SAI) %Gain Vs. Portland Cement Table
Compressive Strength (CS) Tests of Cement - Individual Test Results

A comparison of the four individual Series A and Series B strength tests, measured at 7- and 28-days in megapascals (MPa) of a 20% PozPyro/80% Portland Cement blend against a 100% pure Portland Cement control, a 20% fly ash blend, a 20% ground granulated blast-furnace slag (GGBFS) blend, and a 20% silica fume blend produced using traditional methods.
Compressive Strength (CS) Test of Cement - Averaged Result by Test Series

A comparison of the Series A and Series B strength tests, measured at 7- and 28-days in megapascals (MPa) of a 20% PozPyro/80% Portland Cement blend, using averages of each of two tests within both Series A and Series B, against 100% pure Portland Cement control, 20% fly ash blend, 20% ground granulated blast-furnace slag (GGBFS) blend, and 20% silica fume blend.
Comparing CO2 Emission of Cement Additive Production

A comparison of CO2 emitted during the production of 1 tonne of PozPyro vs. other cement additive products. CO2 emission assigned to PozPyro comes from production of electricity subsequently used by the process, not from the process itself.
Conversion of Crystalline Quartz to Amorphous Silica through PyroGenesis’ Plasma Process

A zero-CO2, energy-efficient conversion of crystalline quartz to amorphous silica through PyroGenesis’ plasma process.


« Previous Page 1 | 2 | 3             
Featured Video
Latest Blog Posts
Sanjay GangalIndustry Predictions
by Sanjay Gangal
AECCafe Industry Predictions for 2025 – DGG
Jobs
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Equipment Engineer, Raxium for Google at Fremont, California
Sr. GIS Apps Product Engineer for ESRI at Portland, ME, Maine
Business Development Manager for Berntsen International, Inc. at Madison, Wisconsin
Upcoming Events
Geospatial World Forum 2025 at Madrid Marriott Auditorium Madrid Spain - Apr 22 - 25, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025
SIGGRAPH 2025 at Convention Centre Vancouver, British Columbia Canada - Aug 10 - 14, 2025



© 2025 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise