3D Systems Reports Fourth Quarter and Full Year 2023 Financial Results (Unaudited)
[ Back ]   [ More News ]   [ Home ]
3D Systems Reports Fourth Quarter and Full Year 2023 Financial Results (Unaudited)

ROCK HILL, S.C., Feb. 27, 2024 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the fourth quarter and full year ended December 31, 2023.

Fourth Quarter Financial Results (Unaudited)
(All numbers are unaudited and are presented in thousands, except per share amounts or otherwise noted)

Full Year 2023 Financial Results (Unaudited)
(All numbers are unaudited and are presented in thousands, except per share amounts or otherwise noted)

Unaudited  Quarter Ended December 31, Year Ended December 31,
(in thousands, expect per share data)  2023   2022   2023   2022 
Revenue $114,848  $132,732  $488,069  $538,031 
Gross profit margin $46,348  $54,630  $198,812  $214,233 
Operating loss $(335,594) $(28,044) $(414,303) $(117,019)
Net loss attributable to 3D Systems Corporation $(300,412) $(25,553) $(370,432) $(122,711)
Diluted loss per share $(2.30) $(0.20) $(2.85) $(0.96)
         
Non-GAAP measures for year-over-year comparisons (1)      
         
Non-GAAP gross profit margin  41.9%  40.9%  41.1%  39.8%
Adjusted EBITDA $(12,260) $(4,808) $(24,525) $(5,781)
Non-GAAP diluted loss per share $(0.11) $(0.06) $(0.26) $(0.23)

(1) See “Presentation of Information in this Press Release” below for a description, and the Appendix for the reconciliation of non-GAAP measurements to the most closely comparable GAAP measure.

Summary Comments on Results
Commenting on 2023 results and the outlook for 2024, Dr. Jeffrey Graves, president and CEO of 3D Systems said, “Our fourth quarter revenue results reflect the significant headwinds created by ongoing macroeconomic and geopolitical volatility. As we exited the third quarter, we had expected some of these broader pressures to moderate through year-end, as historical seasonality of increased consumption and year-end customer capex spending would typically translate to an acceleration of revenues in the fourth quarter. While customer-driven pre-sales activities did accelerate as expected in the quarter, the same cannot be said for revenue. Fortunately, based upon customer feedback, we view this as a market timing issue rather than any permanent trend in customer adoption rates for additive manufacturing, or a loss of market share for 3D Systems.”

“Reflecting on 2023 in its entirety, the most influential driver to our revenue performance was our dental orthodontic product line, with revenues declining 39% from 2022 levels and essentially cut in half from their peak in 2021. However, adding to the pressure from this market was a sluggishness broadly in capex spending on new production capacity by both our Healthcare and Industrial customers. These combined effects resulted in a significant revenue headwind for 2023. In response to this softness, we’ve undertaken a comprehensive restructuring initiative to reduce costs, improve margins through greater efficiencies, and keep the company solidly on a path for sustained profitability and positive operating cash flow. The rise in gross margins, even in the face of declining volumes in 2023, is an early indicator of these efficiency improvements, which we expect to continue throughout 2024.”

“It is important to note that we are different from others in the additive manufacturing industry in that we have the broadest range of technology platforms, which we bring to market through two focused business units, Healthcare and Industrial Solutions. These platforms span metals, polymers and biologics, and, by necessity, require deep expertise in hardware, software and materials development. This technology foundation, in which we have been heavily investing for the last two years, along with industry-leading operational scale and an outstanding global reach, give us an ability to continue taking cost out of our business while preserving the critical investments needed to support the exciting growth opportunities we see ahead. Our goal is to balance short-term profitability and cash performance in 2024, with the need to ensure continuity in essential R&D investments for growth. This balance is critical for two reasons. First, risks remain in the world economic outlook, which could continue to impact sales in the short term. However, offsetting this pressure are a number of very targeted key-customer applications we expect to bring to market over the next 12-18 months. Fortunately, to execute these restructuring and investment plans, we have a strong balance sheet with over $300 million in cash, and 0% interest debt that is not due until late 2026. This gives us an ability to thoughtfully restructure the business to drive profitability and cash performance, while supporting key customer-driven development programs that we believe will add meaningfully to our top line revenues in the years ahead.”

Dr. Graves concluded, “Given the continuing risks we see to the world economy, we expect moderating but continued sales pressures, which we are translating into relatively flat top line revenue expectations for the year. Given this, we will prioritize completion of our previously announced restructuring program, which includes headcount reductions, significant site consolidations and a reduction in external spending. We believe these efforts, which will largely be completed by mid-year, will favorably impact both COGS and OPEX, further improve gross margins, and deliver positive adjusted-EBITDA performance and operating cash flow for the full year. In parallel, we will continue our most important development programs that are now, after over two years of increased R&D investment, beginning to yield exciting results. We expect these new additive solutions to materially change the way products are designed and manufactured and healthcare is delivered. We believe the path forward is very clear. In the short term, we will manage our costs to deliver improving margins and cash performance in the face of economic uncertainty. As these clouds then lift, the opportunities for growth in our industry remain incredibly bright. We believe that this focus on our strategic initiatives will harmonize the ability to deliver sustainable profitability this year, while preserving the exceptional opportunities we have to deliver long-term shareholder value in the years ahead.”

Summary of Fourth Quarter Results (Unaudited)

Revenue for the fourth quarter of 2023 decreased 13.5% to $114,848 compared to the same period last year, and revenue on a constant currency basis decreased 14.7%. The decline of revenue primarily reflects lower sales to certain dental orthodontic market customers and lower printer sales more broadly throughout the remaining portfolio due to macroeconomic factors that are negatively impacting demand.

Healthcare Solutions revenue decreased 15.7% to $51,188 compared to the prior year period, and revenue on a constant currency basis decreased 16.4% year over year.

Industrial Solutions revenue decreased 11.6% to $63,660 compared to the prior year period, and revenue on a constant currency basis decreased 13.3% year over year.

Gross profit margin for the fourth quarter of 2023 was 40.4% compared to 41.2% in the same period last year. Non-GAAP gross profit margin was 41.9% compared to 40.9% in the same period last year and increased primarily due to favorable mix.

Net loss attributable to 3D Systems Corporation increased by $274,859 to a loss of $300,412 in the fourth quarter of 2023 compared to the same period in the prior year. The increase in net loss attributable to 3D Systems Corporation primarily reflects $297,689 related to the impairment of goodwill and other intangible assets.

Adjusted EBITDA decreased by $7,452 to a loss of $12,260 in the fourth quarter of 2023 compared to the same period last year primarily driven by lower revenue and an increase in operating expenses associated with investments in Regenerative Medicine and an increase in short-term consulting and outside services expenses.

Summary of Full-Year 2023 Results (Unaudited)

Revenue for 2023 of $488,069 decreased 9.3% compared to the prior year. Revenue on a constant currency basis decreased 9.6%. The decline in revenue primarily reflects lower sales to certain dental orthodontic market customers due to macroeconomic factors that are negatively impacting demand.

Healthcare Solutions revenue decreased 18.3% to $213,216, compared to the prior year, and revenue on a constant currency basis decreased 18.6% year over year.

Industrial Solutions revenue decreased 0.8% to $274,853 compared to the prior year, and revenue on a constant currency basis decreased 1.1% year over year.

Gross profit margin for the full year 2023 was 40.7% compared to 39.8% in the prior year. Non-GAAP gross profit margin was 41.1% for the full year 2023 compared to 39.8% in the prior year. Gross profit margin increased primarily driven by improved operational efficiencies and favorable mix.

Net loss attributable to 3D Systems Corporation for the full year 2023 increased by $247,721 to a loss of $370,432 compared to the prior year. The increase in net loss attributable to 3D Systems Corporation primarily reflects an impairment of goodwill and other intangible assets, lower revenue and an increase in operating expenses associated with investments in our Regenerative Medicine business and an increase in consulting and outside services expenses.

Adjusted EBITDA decreased by $18,744 to a loss of $24,525 in 2023 compared to last year primarily driven by the unfavorable impact of lower volumes from dental orthodontics markets and an increase in operating expenses associated with investments in Regenerative Medicine and an increase in consulting and outside services expenses.

2024 Outlook

The company is providing full-year 2024 financial guidance as follows:

Revenue:$475 - $505 million
Non-GAAP Gross Profit Margin:42% - 44%
Non-GAAP Operating Expense:$223 - $238 million
Adjusted EBITDA:Break even or better
  

Financial Liquidity (Unaudited)

At December 31, 2023, cash and cash equivalents and short-term investments totaled $331,525 and decreased $237,212 since December 31, 2022. This decrease resulted primarily from the repurchase of our Convertible Notes of $100,614, cash used in operations of $80,671, acquisitions and other investments, net of cash acquired, of $29,152, capital expenditures of $27,183, and taxes paid related to net-share settlement of equity awards of $5,211, offset by a $3,492 effect of exchange rate changes on cash, cash equivalents and restricted cash. At December 31, 2023, the company had total debt, net of deferred financing costs of $319,356.

Status of Audit; Delayed Form 10-K Filing

The unaudited financial data above remains subject to audit as the company continues its close process. Accordingly, actual results may differ from the anticipated results shown above.

3D Systems will delay the filing of its Annual Report on Form 10-K for the fiscal year ended December 31, 2023 and file a Form 12b-25, Notification of Late Filing, with the Securities and Exchange Commission, which extends the deadline to file the Form 10-K. The delay in filing is primarily due to additional time required by the company to complete its financial reporting close procedures. It has no impact on the company's operations or on its ability to discuss its anticipated 2023 results and 2024 outlook.

Q4 and FY 2023 Conference Call and Webcast

The company will host a conference call and simultaneous webcast to discuss these results on February 28, 2024, which may be accessed as follows:

Date: Wednesday, February 28, 2024
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 201-689-8345

A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.

Forward-Looking Statements

Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward looking statements can be identified by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates,” “intends,” “anticipates” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings “Forward-Looking Statements” and “Risk Factors” in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as the date of the statement. 3D Systems undertakes no obligation to update or revise any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise, except as required by law.

Presentation of Information in this Press Release

3D Systems reports its financial results in accordance with GAAP. Management also reviews and reports certain non-GAAP measures, including: non-GAAP gross profit, non-GAAP gross profit margin, non-GAAP diluted income (loss) per share, and Adjusted EBITDA. These non-GAAP measures exclude certain items that management does not view as part of 3D Systems’ core results as they may be highly variable, may be unusual or infrequent, are difficult to predict and can distort underlying business trends and results. Management believes that the non-GAAP measures provide useful additional insight into underlying business trends and results and provide meaningful information regarding the comparison of period-over-period results. Additionally, management uses the non-GAAP measures for planning, forecasting and evaluating business and financial performance, including allocating resources and evaluating results relative to employee compensation targets. 3D Systems’ non-GAAP measures are not calculated in accordance with or as required by GAAP and may not be calculated in the same manner as similarly titled measures used by other companies. These non-GAAP measures should thus be considered as supplemental in nature and not considered in isolation or as a substitute for the related financial information prepared in accordance with GAAP.

To calculate the non-GAAP measures, 3D Systems excludes the impact of the following items:

Amortization of intangibles and acquisition and divestiture-related costs are excluded from non-GAAP measures as the timing and magnitude of business combination transactions are not predictable, can vary significantly from period to period and the purchase price allocated to amortizable intangible assets and the related amortization period are unique to each acquisition. Amortization of intangible assets will recur in future periods until such intangible assets have been fully amortized. While intangible assets contribute to the company’s revenue generation, the amortization of intangible assets does not directly relate to the sale of the company’s products or services. Additionally, intangible assets amortization expense typically fluctuates based on the size and timing of the company’s acquisition activity. Accordingly, the company believes excluding the amortization of intangible assets enhances the company’s and investors’ ability to compare the company’s past financial performance with its current performance and to analyze underlying business performance and trends. Although stock-based compensation is a key incentive offered to certain of our employees, the expense is non-cash in nature, and we continue to evaluate our business performance excluding stock-based compensation; therefore, it is excluded from non-GAAP measures. Stock-based compensation expenses will recur in future periods. Charges related to restructuring and cost optimization plans, impairment charges, including goodwill, divestiture gains or losses, and the costs, including legal fees, related to significant or unusual litigation matters are excluded from non-GAAP measures as the frequency and magnitude of these activities may vary widely from period to period. Additionally, impairment charges, including goodwill, are non-cash. Furthermore, the company believes the costs, including legal fees, related to significant or unusual litigation matters are not indicative of our core business' operations. Finally, 3D Systems excludes contingent consideration recorded as compensation expense related to the 2021 Volumetric acquisition from non-GAAP measures as management evaluates financial performance excluding this expense, which is viewed by management as similar to acquisition consideration.

The matters discussed above are tax effected, as applicable, in calculating non-GAAP diluted income (loss) per share.

Adjusted EBITDA, defined as net income, plus income tax (provision) benefit, interest and other income (expense), net, stock-based compensation expense, amortization of intangible assets, depreciation expense, and other non-GAAP adjustments, all as described above, is used by management to evaluate performance and helps measure financial performance period-over-period.

A reconciliation of GAAP to non-GAAP financial measures is provided in the accompanying schedules.

3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The company is unable to provide a quantitative reconciliation of forward-looking non-GAAP gross profit margin, Adjusted EBITDA, and non-GAAP operating expense to the most directly comparable forward-looking GAAP measures without unreasonable effort because certain items, including litigation costs, acquisition expenses, stock-based compensation expense, intangible assets amortization expense, restructuring expenses, and goodwill impairment charges are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.

About 3D Systems

More than 35 years ago, 3D Systems brought the innovation of 3D printing to the manufacturing industry. Today, as the leading additive manufacturing solutions partner, we bring innovation, performance, and reliability to every interaction - empowering our customers to create products and business models never before possible. Thanks to our unique offering of hardware, software, materials and services, each application-specific solution is powered by the expertise of our application engineers who collaborate with customers to transform how they deliver their products and services. 3D Systems’ solutions address a variety of advanced applications in Healthcare and Industrial Solutions markets such as medical and dental, aerospace & defense, automotive and durable goods. More information on the company is available at www.3dsystems.com

Tables Follow

3D Systems Corporation
Unaudited Consolidated Balance Sheets
December 31, 2023 and December 31, 2022
 
(in thousands, except par value) December 31, 2023 December 31, 2022
ASSETS   
Current assets:   
Cash and cash equivalents$331,525  $388,134 
Short-term investments —   180,603 
Accounts receivable, net of reserves — $3,389 and $3,114 102,104   93,886 
Inventories 152,412   137,832 
Prepaid expenses and other current assets 36,701   33,790 
Total current assets 622,742   834,245 
Property and equipment, net 64,461   58,072 
Intangible assets, net 62,724   90,230 
Goodwill 107,200   385,312 
Operating lease right-of-use assets 58,406   39,502 
Finance lease right-of-use assets 12,174   3,244 
Long-term deferred income tax assets 4,230   7,038 
Other assets 48,251   28,970 
Total assets$980,188  $1,446,613 
LIABILITIES, REDEEMABLE NON-CONTROLLING INTEREST AND EQUITY   
Current liabilities:   
Current operating lease liabilities$9,924  $8,343 
Accounts payable 49,757   53,826 
Accrued and other liabilities 46,631   56,264 
Customer deposits 8,206   6,911 
Deferred revenue 30,448   26,464 
Total current liabilities 144,966   151,808 
Long-term debt, net of deferred financing costs 319,356   449,510 
Long-term operating lease liabilities 56,795   38,499 
Long-term deferred income tax liabilities 5,162   7,631 
Other liabilities 33,399   47,461 
Total liabilities 559,678   694,909 
Commitments and contingencies (Note 23)   
Redeemable non-controlling interest 2,006   1,760 
Stockholders’ equity:   
Common stock, $0.001 par value, authorized 220,000 shares; shares issued 133,619 and 131,207 as of December 31, 2023 and 2022, respectively 134   131 
Additional paid-in capital 1,577,382   1,547,597 
Accumulated deficit (1,114,394)  (743,962)
Accumulated other comprehensive loss (44,618)  (53,822)
Total stockholders’ equity 418,504   749,944 
Total liabilities, redeemable non-controlling interest and stockholders’ equity$980,188  $1,446,613 


3D Systems Corporation
Unaudited Consolidated Statements of Operations
Year Ended December 31, 2023, 2022 and 2021
 
 Year Ended December 31,
(in thousands, except per share amounts) 2023   2022   2021 
Revenue:     
Products$328,731  $395,396  $428,742 
Services 159,338   142,635   186,897 
Total revenue 488,069   538,031   615,639 
Cost of sales:     
Products 200,616   237,386   245,169 
Services 88,641   86,412   106,692 
Total cost of sales 289,257   323,798   351,861 
Gross profit 198,812   214,233   263,778 
Operating expenses:     
Selling, general and administrative 212,101   244,181   227,697 
Research and development 89,728   87,071   69,150 
Impairments of goodwill and intangible assets 311,286   —   — 
Total operating expenses 613,115   331,252   296,847 
Loss from operations (414,303)  (117,019)  (33,069)
Interest and other income (expense), net 44,362   (3,790)  352,609 
(Loss) income before income taxes (369,941)  (120,809)  319,540 
Benefit (provision) for income taxes 526   (2,140)  2,512 
Loss on equity method investment, net of income taxes (1,282)  —   — 
Net (loss) income before redeemable non-controlling interest (370,697)  (122,949)  322,052 
Less: net loss attributable to redeemable non-controlling interest (265)  (238)  — 
Net (loss) income attributable to 3D Systems Corporation$(370,432) $(122,711) $322,052 
      
Net (loss) income per common share     
Basic$(2.85) $(0.96) $2.62 
Diluted$(2.85) $(0.96) $2.55 
      
Weighted average shares outstanding:     
Basic 129,944   127,818   122,867 
Diluted 129,944   127,818   126,334 


3D Systems Corporation
Unaudited Consolidated Statements of Operations
Three Months Ended December 31, 2023, 2022 and 2021
 
 Three Months Ended December 31,
(in thousands, except per share amounts) 2023   2022   2021 
Revenue:     
Products$74,763  $94,734  $117,572 
Services 40,085   37,998   33,298 
Total revenue 114,848   132,732   150,870 
Cost of sales:     
Products 47,174   55,541   64,918 
Services 21,326   22,561   19,734 
Total cost of sales 68,500   78,102   84,652 
Gross profit 46,348   54,630   66,218 
Operating expenses:     
Selling, general and administrative 61,478   58,783   50,897 
Research and development 22,775   23,891   19,163 
Impairments of goodwill and intangible assets 297,689   —   — 
Total operating expenses 381,942   82,674   70,060 
Loss from operations (335,594)  (28,044)  (3,842)
Interest and other income (expense), net 34,671   1,666   (1,787)
Loss before income taxes (300,923)  (26,378)  (5,629)
Benefit (provision) for income taxes 930   771   (571)
Loss on equity method investment, net of income taxes (535)  —   — 
Net loss before redeemable non-controlling interest (300,528)  (25,607)  (6,200)
Less: net loss attributable to redeemable non-controlling interest (116)  (54)  — 
Net loss attributable to 3D Systems Corporation$(300,412) $(25,553) $(6,200)
      
Net loss per share available to 3D Systems Corporation common stockholders     
Basic$(2.30) $(0.20) $(0.05)
Diluted$(2.30) $(0.20) $(0.05)


3D Systems Corporation
Unaudited Consolidated Statements of Cash Flows
 
 Year Ended
December 31,
(in thousands) 2023   2022   2021 
Cash flows from operating activities:     
Net (loss) income before redeemable non-controlling interest$(370,697) $(122,949) $322,052 
Adjustments to reconcile net (loss) income to net cash (used in) provided by operating activities:     
Depreciation, amortization and accretion of debt discount 36,053   38,686   34,623 
Stock-based compensation 23,367   42,415   55,153 
Loss on short-term investments 6   3,146   — 
Non-cash operating lease expense 9,267   6,366   5,681 
Provision for inventory obsolescence and revaluation 6,350   2,586   (2,909)
Loss on hedge accounting de-designation and termination —   —   721 
Provision for bad debts 595   562   232 
Loss (gain) on the disposition of businesses, property, equipment and other assets 6   104   (350,846)
Gain on debt extinguishment (32,181)  —   — 
Provision for deferred income taxes and reserve adjustments (2,412)  (2,518)  (11,679)
Loss on equity method investment 1,282   —   — 
Impairments of assets 313,204   4,095   1,676 
Changes in operating accounts:     
Accounts receivable (6,793)  8,144   (11,912)
Inventories (20,779)  (51,082)  7,866 
Prepaid expenses and other current assets (2,049)  8,229   (8,106)
Accounts payable (5,526)  (3,787)  27,159 
Deferred revenue and customer deposits 1,852   (6,947)  (3,325)
Accrued and other liabilities (15,744)  10,702   (12,389)
All other operating activities (16,472)  (7,773)  (5,850)
Net cash (used in) provided by operating activities (80,671)  (70,021)  48,147 
Cash flows from investing activities:     
Purchases of property and equipment (27,183)  (20,907)  (18,791)
Purchases of short-term investments —   (384,388)  — 
Sales and maturities of short-term investments 180,925   200,314   — 
Proceeds from sale of assets and businesses, net of cash sold 194   325   421,485 
Acquisitions and other investments, net of cash acquired (29,152)  (103,699)  (139,685)
Other investing activities —   —   (2,454)
Net cash provided by (used in) investing activities 124,784   (308,355)  260,555 
Cash flows from financing activities:     
Proceeds from borrowings —   —   460,000 
Debt issuance costs —   —   (13,466)
Repayment of borrowings/long-term debt (100,614)  —   (21,392)
Purchase of non-controlling interests —   (2,300)  (6,300)
Taxes paid related to net-share settlement of equity awards (5,211)  (10,864)  (12,619)
Other financing activities (644)  (651)  (423)
Net cash (used in) provided by financing activities (106,469)  (13,815)  405,800 
Effect of exchange rate changes on cash, cash equivalents and restricted cash 3,492   (5,804)  (9,243)
Net (decrease) increase in cash, cash equivalents and restricted cash (58,864)  (397,995)  705,259 
Cash, cash equivalents and restricted cash at the beginning of the year a 391,975   789,970   84,711 
Cash, cash equivalents and restricted cash at the end of the year a$333,111  $391,975  $789,970 

(a)The amounts for cash and cash equivalents shown above include restricted cash of $119, $114 and $313 as of December 31, 2023, 2022 and 2021, respectively, which are included in prepaid expenses and other current assets. In addition, included in cash and cash equivalents above as of December 31, 2023 and 2022 is 1,467 and $3,727 of restricted cash, which, is included in other non-current assets.
(b) Inventory is transferred to property and equipment at cost when we require additional machines for training or demonstration or for placement into on demand manufacturing services locations

Appendix
3D Systems Corporation
Unaudited Reconciliations of GAAP to Non-GAAP Measures
Three Months Ended December 31, 2023 and 2022.

Constant Currency Revenue (4)

 Three Months Ended December 31,  Constant Currency (1) 
(in thousands)2023 2022 $ Change % Change  FX Effect (2) % Change (3) 
Healthcare Solutions$51,188 $60,694 $(9,506) (15.7)% $454 (16.4)%
Industrial Solutions 63,660  72,038  (8,378) (11.6)%  1,196 (13.3)%
Total revenue$114,848 $132,732 $(17,884) (13.5)% $1,650 (14.7)%

(1) To assist in the analysis of the Company’s revenue trends, the Company estimated the impact of foreign exchange on year-over-year revenue growth by recasting revenue for the three months ended December 31, 2023 by applying the foreign exchange rates used to translate 2022 non-US functional currency revenue to 2023 non-US functional currency revenue.
(2) Represents the estimated impact on "as reported" revenue due to changes in foreign currency exchange rates
(3) Represents the % increase or decrease in revenue excluding the estimated "FX effect"
(4)Amounts in table may not foot due to rounding

 Year Ended December 31,  Constant Currency (1) 
(in thousands)2023 2022 $ Change % Change  FX Effect (2) % Change (3) 
Healthcare Solutions$213,216 $260,988 $(47,772) (18.3)% $817 (18.6)%
Industrial Solutions 274,853  277,043  (2,190) (0.8)%  971 (1.1)%
Total revenue$488,069 $538,031 $(49,962) (9.3)% $1,788 (9.6)%

(1) To assist in the analysis of the Company’s revenue trends, the Company estimated the impact of foreign exchange on year-over-year revenue growth by recasting revenue for the year ended December 31, 2023 by applying the foreign exchange rates used to translate 2022 non-US functional currency revenue to 2023 non-US functional currency revenue.
(2) Represents the estimated impact on "as reported" revenue due to changes in foreign currency exchange rates
(3) Represents the % increase or decrease in revenue excluding the estimated "FX effect"
(4)Amounts in table may not foot due to rounding

Gross Profit and Gross Profit Margin (1)

 Three Months Ended December 31,
(in thousands) 2023   2022 
 Gross Profit Gross Profit Margin (2) Gross Profit Gross Profit Margin (2)
GAAP$46,348 40.4% $54,630  41.2%
Amortization expense included in Cost of sales 382    (398)  
Restructuring expense included in Cost of sales 1,427    —   
Non-GAAP$48,157 41.9% $54,232  40.9%

(1)Amounts in table may not foot due to rounding
(2) Calculated as non-GAAP gross profit as a percentage of total revenue.

 Year Ended December 31,
(in thousands) 2023   2022 
 Gross Profit Gross Profit Margin (2) Gross Profit Gross Profit Margin(2)
GAAP$198,812 40.7% $214,233 39.8%
Amortization expense included in Cost of sales 506    14  
Restructuring expense included in Cost of sales 1,427    —  
Non-GAAP$200,745 41.1% $214,247 39.8%
        

(1)Amounts in table may not foot due to rounding
(2) Calculated as non-GAAP gross profit as a percentage of total revenue.

Appendix
3D Systems Corporation
Unaudited Reconciliations of GAAP to Non-GAAP Measures
Three and Twelve Months Ended December 31, 2023 and 2022

Net Loss to Adjusted EBITDA (1)

 Three Months Ended
December 31,		 Year Ended
December 31,
(in thousands) 2023   2022   2023   2022 
Net loss attributable to 3D Systems Corporation$(300,412) $(25,553) $(370,432) $(122,711)
Interest income, net (3,778)  (2,522)  (16,896)  (6,541)
(Benefit) provision for income taxes (930)  (771)  (526)  2,140 
Depreciation expense 5,656   5,104   21,346   21,096 
Amortization expense 2,391   5,207   12,067   15,480 
Stock-based compensation expense 8,224   10,980   23,367   42,489 
Acquisition and divestiture-related expense 468   2,978   600   12,360 
Legal expense 3,174   (1,418)  8,053   19,062 
Restructuring expense 4,774   381   11,487   733 
Redeemable non-controlling interest (116)  (54)  (265)  (238)
Loss (income) on equity method investment 535   (90)  1,282   (90)
Goodwill and other assets impairment charges 298,647   3   312,858   18 
Gain on repurchase of debt (32,181)  —   (32,181)  — 
Other non-operating (income) expense 1,288   947   4,715   10,421 
Adjusted EBITDA$(12,260) $(4,808) $(24,525) $(5,781)

(1) Amounts in table may not foot due to rounding

Appendix
3D Systems Corporation
Unaudited Reconciliations of GAAP to Non-GAAP Measures
Three and Twelve Months Ended December 31, 2023 and 2022

Non-GAAP Diluted Loss per Share (1)(2)

 Three Months Ended
December 31,		 Year Ended
December 31,
(in dollars) 2023   2022   2023   2022 
Diluted loss per share$(2.30) $(0.20) $(2.85) $(0.96)
Amortization expense 0.02   0.04   0.09   0.12 
Stock-based compensation expense 0.06   0.09   0.18   0.33 
Acquisition and divestiture-related expense —   0.02   —   0.10 
Legal expense 0.02   (0.01)  0.06   0.17 
Restructuring expense 0.04   —   0.09   0.01 
Goodwill and other assets impairment charges 2.30   —   2.42   — 
Gain on repurchase of debt (0.25)  —   (0.25)  — 
Non-GAAP diluted loss per share$(0.11) $(0.06) $(0.26) $(0.23)

(1)Amounts in table may not foot due to rounding
(2)Amounts in table are stated per share


Primary Logo