3D Systems Moves Manufacturers from Prototyping to Production - Showcasing New Solutions at RAPID+TCT 2018, Including Figure 4 with World's Fastest Time-to-Part
[ Back ]   [ More News ]   [ Home ]
3D Systems Moves Manufacturers from Prototyping to Production - Showcasing New Solutions at RAPID+TCT 2018, Including Figure 4 with World's Fastest Time-to-Part

- 3D Systems' Figure 4™ platform demonstrates industry-leading throughput and accuracy for plastic part production

ROCK HILL, S.C., April 23, 2018 — (PRNewswire) —  This week at RAPID+TCT 2018, 3D Systems (NYSE: DDD) is showcasing its portfolio of industry-leading solutions that are helping manufacturers move from prototyping to production and realize competitive advantages. One such platform designed for production is Figure 4™ Production and Figure 4 Standalone - the fastest, most accurate 3D printing technology available. Recently released data on Figure 4 Production highlights part print speeds up to 65mm/hr, with prototyping speeds of up to 100 mm/hr. The Figure 4 platform delivers part accuracy and repeatability, with Six Sigma repeatability (Cpk > 2) across all materials. The combination of speed and accuracy complemented by a light-based UV curing process that takes minutes versus hours with heat-based curing processes, yields the world's fastest additive manufacturing throughput and time-to-part.

FabPro™ 1000

Figure 4 enables high-speed digital molding, a process that complements traditional production methods, providing manufacturers the accuracy, reliability, repeatability and uptime of traditional molding, producing parts without the costs and time-consuming aspects of tooling. Digital molding is completely scalable, and with the high surface quality available on Figure 4, excels at fine part texturing. In comparison to conventional manufacturing, part texturing is essentially free and applicable to any surface no matter the shape.

In addition to supporting long- and short-run batches, high-speed digital molding allows different parts to be produced in the same batch. This gives manufacturers the ability to quickly iterate a design or manufacture end-use parts without regard to a minimum order quantity.

At RAPID+TCT 2018, 3D Systems is announcing over 30 materials for Figure 4 Production including:

Figure 4 Production is compatible with 3D Systems' entire portfolio of NextDent™ resins to facilitate full customization of dental devices, as well as an Orthodontic Tooling resin. Figure 4 Production customers also have the option of collaborating with 3D Systems' engineers to create unique resins specifically designed for their application. Custom configuration pricing offers both low Total Cost of Operation (TCO) and low per part cost.

This event marks the first time that attendees have the opportunity to experience Figure 4 Production and Figure 4 Standalone in-person. Earlier this year at LMT Lab Day Chicago 2018, 3D Systems unveiled the NextDent™ 5100 – powered by Figure 4 technology – which facilitates high-speed 3D printing of dental devices and fixtures.

General availability for Figure 4 Standalone is planned for Q3 2018 and will be priced below $25,000. Manufacturers interested in Figure 4 Production can collaborate with the company's Production Printer Team to configure a solution customized to their business needs.

"At Rapid+TCT, 3D Systems continues to deliver on its promise to 'Make 3D Production Real.'  We are showcasing key print technologies and supporting materials, giving designers and manufacturers a migration path from entry level additive manufacturing solutions to full, automated configurations that support Industry 4.0," said Vyomesh Joshi, president and chief executive officer, 3D Systems. "This is only made possible by the decades of accumulated expertise our engineers and scientists bring to the industry. It is through their knowledge and passion that 3D Systems is helping organizations redefine their design, manufacturing and supply chain models."

Revolutionizing Plastics Production
For manufacturers needing to produce larger parts with superior durability and finishing, the company is pleased to announce general availability of the ProX® SLS 6100. The next-generation printing platform enables customers to seamlessly scale from functional prototyping to low volume functional production parts. By combining the printer, new materials, software and cloud-based services, this new solution addresses the majority of the plastic prototyping and production needs of the automotive, durable goods, and healthcare industries as well as satisfying specific needs for aerospace interior cabin parts. The ProX SLS 6100 also delivers larger parts than small-frame systems, industry-leading TCO and is aggressively priced against similar printers in its class. 3D Systems offers a strong portfolio of Nylon materials to complement this new selective laser sintering printer:

The ProX SLS 6100 solution incorporates production-grade materials, 3D Sprint™ software, and 3D Connect™ capability for cloud-based monitoring services to address prototyping and production needs. The complete solution of materials, technology and software combined with a competitive initial purchase price delivers a 20% lower TCO over similar printers. The ProX SLS 6100 is available as part of a complete turn-key solution for less than $300,000.

For companies looking for an entry-level industrial 3D printing solution, 3D Systems is announcing late May 2018 planned general availability of the FabPro™ 1000, ideal for low-volume small part prototyping and production. The FabPro 1000 – which includes the company's 3D Sprint software - creates precise, high-quality parts at up to three-times-faster throughput compared to competing systems. The entry-level industrial printer is launching with three new materials:

The FabPro 1000 completed beta testing to very positive reviews. Scott Young, engineering manager, Bastech, Inc. commented, "The FabPro 1000's speed allowed me to build parts and finish them in the same day, and the surface quality rivals what I've seen on more expensive technologies. Changing materials was also easy compared to other systems – it is as simple as replacing the print tray and adding a new material."

Improved Quality Control for Metal Parts
In addition to its 3D printing solutions for Plastics, 3D Systems offers a full-line of solutions for metal additive manufacturing. Today, the company is launching DMP Monitoring, which equips users with a toolset for enhanced quality control for its Direct Metal Printing technology. DMP Monitoring provides technicians real-time data collection and analysis to optimize build parameters and produce higher quality parts. Over time, this enables reduced waste, improved productivity, and lower TCO. Additionally, the ability to archive photos and images to support process traceability and documentation for highly regulated industries such as aerospace and healthcare.

3D Systems developed DMP Monitoring based on its extensive expertise gained from producing more than 500,000 metal parts annually in its global Customer Innovation Centers. The toolset combines DMP Vision and DMP Meltpool to capture images of the powder bed and the meltpool to highlight areas of interest for further exploration. DMP Monitoring is currently available for 3D Systems' ProX® DMP 320 printers. It will be included with the company's DMP 8500 Factory Solution when it becomes generally available later in 2018.

New Streamlined Workflow for Organic Design
Software is an important component of 3D Systems' solutions that helps manufacturers redefine their workflows and move from prototyping to production. At RAPID+TCT 2018, 3D Systems will demonstrate the recently announced integration between leading 3D scanner manufacturer Artec and Geomagic® Freeform®. Artec scanners can now be ordered with Geomagic Freeform software, which features a rich set of organic 3D engineering hybrid modeling tools. Designers can scan models and textures directly into Freeform to complete their design, streamlining the workflow and facilitating the design of orthopedic and prosthetic devices as well as innovative consumer products, original artwork and jewelry with fine, intricate details.

Our People Know
For more than three decades, 3D Systems has demonstrated its industry leadership and expertise to help manufacturers across a variety of industries redefine their workflows to realize the benefits of additive manufacturing. Visitors to the 3D Systems booth (#1204) at RAPID+TCT 2018 can see this expertise in action through 3D Systems' portfolio of end-to-end solutions, and the benefits of its On Demand Manufacturing outsourcing services. Additionally, Bryan Hodgson, 3D Systems' advanced applications leader, will deliver a keynote presentation on Wednesday, April 25 at 10:45AM: "Cost Justification/ROI for Metal Additive Manufacturing."  

Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management's beliefs, assumptions and current expectations and may include comments as to the company's beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company's periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.

About 3D Systems
3D Systems provides comprehensive 3D products and services, including 3D printers, print materials, on demand manufacturing services and digital design tools. Its ecosystem supports advanced applications including Aerospace, Automotive, Consumer Goods, Jewelry, Medical and Dental. 3D Systems' precision healthcare capabilities include simulation, Virtual Surgical Planning, and printing of medical and dental devices as well as patient-specific surgical instruments. As the originator of 3D printing and a shaper of future 3D solutions, 3D Systems has spent its 30-year history enabling professionals and companies to optimize their designs, transform their workflows, bring innovative products to market and drive new business models. More information on the company is available at  www.3dsystems.com

ProX® SLS 6100

(PRNewsfoto/3D Systems)

Cision View original content with multimedia: http://www.prnewswire.com/news-releases/3d-systems-moves-manufacturers-from-prototyping-to-production--showcasing-new-solutions-at-rapidtct-2018-including-figure-4-with-worlds-fastest-time-to-part-300634079.html

SOURCE 3D Systems