UMC Reports First Quarter 2013 Results

Please visit UMC's website for further details regarding the above announcements

Conference Call / Webcast Announcement

Wednesday, May 08, 2013



Time: 

8:00 PM (Taipei) / 8:00 AM (New York) / 1:00 PM (London)



Dial-in numbers and Access Codes:

USA Toll Free:  

1866 519 4004

UK Toll Free:   

0808 234 6646

Singapore and Other Areas: 

+65 6723 9381



Access Code:    

UMC

A live webcast and replay of the 1Q13 results announcement will be available at www.umc.com under the "Investor Relations \ Investor Events" section.

About UMC

UMC (NYSE: UMC, TWSE: 2303) is a leading global semiconductor foundry that provides advanced technology and manufacturing for applications spanning every major sector of the IC industry. UMC's robust foundry solutions allow chip designers to leverage the company's leading-edge processes, which include 28nm poly-SiON and gate-last High-K/Metal Gate technology, mixed signal/RFCMOS, and a wide range of specialty technologies. Production is supported through 10 wafer manufacturing facilities that include two advanced 300mm fabs; Fab 12A in Taiwan and Singapore-based Fab 12i. Fab 12A consists of Phases 1-4 which are in production for customer products down to 28nm. Construction is underway for Phases 5&6, with future plans for Phases 7&8. The company employs over 13,000 people worldwide and has offices in Taiwan, Japan, China, Singapore, Europe, and the United States. UMC can be found on the web at http://www.umc.com.

Note from UMC Concerning Forward-Looking Statements

Some of the statements in the foregoing announcement are forward looking within the meaning of the U.S.  Federal Securities laws, including statements about future outsourcing, wafer capacity, technologies, business relationships and market conditions.  Investors are cautioned that actual events and results could differ materially from these statements as a result of a variety of factors, including conditions in the overall semiconductor market and economy; acceptance and demand for products from UMC; and technological and development risks.  Further information concerning these risks is included in UMC's filings with the U.S. SEC, including on Form F-1, F-3, F-6 and 20-F, each as amended.

Safe Harbor Statements

This release contains forward-looking statements.  These statements constitute "forward-looking" statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, and as defined in the U.S. Private Securities Litigation Reform Act of 1995.  You can identify these forward-looking statements by use of words such as "strategy," "expects," "continues," "plans," "anticipates," "believes," "will," "estimates," "intends," "projects," "goals," "targets" and other words of similar meaning.  You can also identify them by the fact that they do not relate strictly to historical or current facts.

These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual performance, financial condition or results of operations of UMC to be materially different from what is stated or may be implied in such forward-looking statements.  Investors are cautioned that actual events and results could differ materially from those statements as a result of a number of factors including, but not limited to: (i) our dependence upon the frequent introduction of new services and technologies based on the latest developments in our industry; (ii) the intensely competitive semiconductor, communications, consumer electronics and computer industries and markets; (iii) the risks associated with international global business activities; (iv) our dependence upon key personnel; (v) general economic and political conditions; (vi) possible disruptions in commercial activities caused by natural and human-induced events and disasters, including terrorist activity, armed conflict and highly contagious diseases; (vii) reduced end-user purchases relative to expectations and orders; and (viii) fluctuations in foreign currency exchange rates.  Further information regarding these and other risks is included in UMC's  filings with the U.S. Securities and Exchange Commission, including its registration statements on Form F-1, F-3, F-6 and 20-F, in each case as amended. UMC does not undertake any obligation to update any forward-looking statement as a result of new information, future events or otherwise, except as required under applicable law.

The financial statements included in this release are prepared and published in accordance with TIFRSs recognized by Financial Supervisory Commission in the ROC, which is different from IFRSs issued by the International Accounting Standards Board. Investors are cautioned that there may be significant differences between TIFRSs and IFRSs. In addition, TIFRSs and IFRSs differ in certain significant respects from US GAAP.

This presentation is not an offer of securities for sale in the United States. Securities may not be offered or sold in the United States absent registration or an exemption from registration. Any public offering of securities to be made in the United States will be made by means of a prospectus that may be obtained from the issuer or selling security holder and that will contain detailed information about the company and management, as well as financial statements.

« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14  Next Page »
Featured Video
Jobs
Principal Engineer for Autodesk at San Francisco, California
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Upcoming Events
Greenbuild 2024 at Pennsylvania Convention Center Philadelphia PA - Nov 12 - 15, 2024
Digital Construction North (DCN) 2024 at Manchester Central. Manchester United Kingdom - Nov 13, 2024
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise