Airbus built ExoMars rover gets its eyes

Stevenage, 20 August 2019 – One of the key instruments on the European Space Agency’s (ESA) ExoMars rover, the Panoramic Camera (PanCam) has been fitted and integrated in the Airbus bio-burden cleanroom in Stevenage.

Designed and built by University College London’s Mullard Space Science Laboratory (MSSL) in an international partnership, and including the High Resolution Camera provided by DLR, the PanCam will be the scientific eyes of the rover when it lands on Mars in spring 2021.

The high resolution camera will take 3D images to be used by the autonomous navigation system on the rover. Images will be sent back to the Rover Operation Control Center for the scientific team to choose a location and then the rover, Rosalind Franklin, will determine its own safe path to travel there. The PanCam will also give textural information for example, laminations or pitting, which could be related to the presence of organisms.

The PanCam will also observe atmospheric phenomena such as Mars’ famous dust devils and water in the atmosphere.

Colin Paynter, Managing Director of Airbus Defence and Space UK said: "ExoMars is Europe's latest flagship space mission and Airbus is at the heart of it.  Today's installation in Stevenage of the powerful PanCam, which will not only provide 3D images of the Martian landscape but also data on the atmosphere, is a major milestone as we move forward to the rover being ready to fly in July 2020.”

 

The PanCam consists of three cameras. Two wide angle cameras will take panoramic images, and a filter wheel enables them to image in 12 different wavelengths. A high resolution camera will image in full colour. Included on the rover is a Rover Inspection Mirror which will allow the PanCam to image parts of the rover not directly in its field of view to allow the status of the rover to be monitored.

The ExoMars rover Rosalind Franklin will be Europe’s first planetary rover and is being assembled at Airbus in Stevenage. It will search for signs of past or present life on Mars and is equipped with a 2m drill to take samples from below the surface where they will have been protected from the harsh radiation environment.

The rover features nine instruments which will help scientists conduct a step-by-step exploration of Mars, from a panoramic scale and progressively converging to smaller (sub-millimetre) studies, concluding with the molecular identification of organic compounds. The rover is equipped with an autonomous navigation system developed by Airbus which will enable it to travel between sites of interest much more quickly than by being driven remotely in real time from Earth.

Rosalind Franklin is in the final stages of integration in the cleanroom in Stevenage. The instruments have been fitted inside the rover’s “bathtub” and the top deck with solar arrays has been installed. The rover’s drill is also in place – with testing due to take place in the next few weeks. After completion at Stevenage the rover will be shipped to Airbus in Toulouse for a programme of environmental testing to prepare it for launch.

About Exomars

ExoMars is an European Space Agency programme executed in cooperation with Russian Space Agency Roscosmos with contribution of NASA.

On the 2020 mission, Thales Alenia Space in Italy, is the mission Prime in charge of the design, development and verification of the entire system, the development of the Carrier Module navigation and guidance system and perform EDL/GNC development, the Rover System, including the Analytical Laboratory Drawer (ALD) as well as supplying basic parts of the DM, including the Radar Altimeter. In addition, Thales Alenia Space in Italy implements a deep technical partnership with Lavochkin (RUS) with European contributions for the development Descent Module (DM) Kazachok. OHB is in charge of developing the Carrier Module (CM) as well as some ALD subsystems (SPDS Mechanisms, Structure and Harness). The Rover Vehicle itself is provided by Airbus Defence and Space in UK. Leonardo is developing the ExoMars drill, which will dig into the Mars subsoil at a depth of two meters plus the Drill and ALD mechanisms control unit and software. ALTEC – Aerospace Logistics Technology Engineering, a Thales Alenia Space in Italy (63.75%) and ASI (36.25%) company – will also be responsible for the design, development and maintenance of the ROCC (Rover Operation Control Center) and for controlling the Rover on the Martian surface.

* * *

About Airbus

Airbus is a global leader in aeronautics, space and related services. In 2018 it generated revenues of € 64 billion and employed a workforce of around 134,000. Airbus offers the most comprehensive range of passenger airliners. Airbus is also a European leader providing tanker, combat, transport and mission aircraft, as well as one of the world’s leading space companies. In helicopters, Airbus provides the most efficient civil and military rotorcraft solutions worldwide.

Featured Video
Jobs
Senior Principal Software Engineer for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise