MACOM’s Comb Generator Portfolio Delivers Industry-Leading Phase Noise Performance

  • MLPNC Series comb generators provide superior phase noise performance up to 20 dBc/Hz better than conventional SRD-based solutions
  • Plug-and-play, monolithic NLTL-based comb generators simplify design cycles by eliminating complex SRD-based harmonic generation circuitry
  • Solutions will be showcased at IMS 2018 in booth #1125

LOWELL, Mass. — (BUSINESS WIRE) — June 11, 2018MACOM Technology Solutions Inc. (“MACOM”), a leading supplier of high performance RF, microwave, millimeterwave and photonic solutions, today announced a portfolio of Non-Linear Transmission Line (NLTL) comb generators optimized to meet the demanding performance requirements of radar transceiver, VSAT and microwave radio applications. Featuring the lowest phase noise in the industry today, MACOM’s MLPNC Series comb generators deliver superior performance and ease-of-design compared to conventional step recovery diode (SRD) based offerings.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20180611005299/en/

The industry-leading phase noise performance delivered by MACOM’s MLPNC Series comb generators is ex ...

The industry-leading phase noise performance delivered by MACOM’s MLPNC Series comb generators is expected to significantly improve the overall performance of RF multiplier modules, complemented by a variable low input power profile (18 – 24 dBm) that relaxes the power requirements on power amplifiers and reduces overall power consumption. MLPNC Series comb generators also enable higher harmonic power at higher frequencies, in contrast with SRD-based comb generators whereby output power rapidly rolls off above 20 GHz. (Photo: Business Wire)

The industry-leading phase noise performance delivered by MACOM’s MLPNC Series comb generators is expected to significantly improve the overall performance of RF multiplier modules, complemented by a variable low input power profile (18 – 24 dBm) that relaxes the power requirements on power amplifiers and reduces overall power consumption. MLPNC Series comb generators also enable higher harmonic power at higher frequencies, in contrast with SRD-based comb generators whereby output power rapidly rolls off above 20 GHz.

MACOM’s monolithic, NLTL-based MLPNC Series comb generators reduce design complexities by eliminating the harmonic generation circuitry needed with SRD-based devices. No bias or tuning is required, and the wide input frequency range extends from 75 – 1500 MHz across the portfolio, enabling the use of a single comb generator for multiple designs, or in combination with a tunable source. MACOM’s MLPNC Series comb generators are available in space saving, compact SMT and connectorized SMA packaging options.

“With the launch of our MLPNC Series comb generators, MACOM has again pushed the boundaries of RF device performance while simultaneously helping to simplify our customers’ frequency synthesizer designs,” said Graham Board, Senior Director of Product Marketing, MACOM. “We believe that our NLTL comb generators deliver best-in-class phase noise performance with useable harmonics up to 50GHz. MACOM’s Combs are MMIC-based so they are more reliable and repeatable than SRD based solutions. As a further advantage we offer both surface-mount and connectorized solutions.”

For over 60 years, MACOM’s design and applications experts have spearheaded innovation in the RF, microwave and millimeterwave domain, developing the industry’s broadest portfolio of MMICs and components spanning the entire RF signal chain. Leveraging advanced, proprietary technologies, MACOM’s heterogeneous semiconductor and packaging strategy ensures that each individual RF system function is fully optimized to deliver maximum performance at the appropriate cost. MACOM remains firmly committed to delivering true competitive advantage to our customers, providing superior technology, expertise, cost structures and supply chains – with no compromises.

The table below outlines typical MLPNC Series comb generator performance:

                   
   

Input Power (dBm)

   
Part Number    

Min

   

Max

    Output Harmonics (dBm)
MLPNC-7100-SMA850     20 @ 100 MHz     24 @ 400 MHz     > -8 @ 4 GHz     > -18 @ 12 GHZ     > -35 @ 20 GHz
MLPNC-7100-SMT680     20 @ 100 MHz     24 @ 400 MHz     > -8 @ 4 GHz     > -18 @ 12 GHZ     > -35 @ 20 GHz

MLPNC-7100S1SMA800

    18 @ 75 MHz     24 @ 250 MHz     > -24 @ 4 GHz     N/A     N/A

MLPNC-7100S1SMT580

    18 @ 75 MHz     24 @ 250 MHz     > -24 @ 4 GHz     N/A     N/A
MLPNC-7102-SMA800     21 @ 400 MHz     23 @ 600 MHz     > -8 @ 4 GHz     > -16 @ 12 GHZ     > -20 @ 20 GHz
MLPNC-7102-SMT680     21 @ 400 MHz     23 @ 600 MHz     > -8 @ 4 GHz     > -16 @ 12 GHZ     > -20 @ 20 GHz
MLPNC7102S1-SMA800     18 @ 300 MHz     24 @ 700 MHz     > -10 @ 4 GHz     > -22 @ 12 GHz     N/A
MLPNC7102S1-SMT580     18 @ 300 MHz     24 @ 700 MHz     > -10 @ 4 GHz     > -22 @ 12 GHz     N/A
MLPNC-7103-SMA800     21 @ 800 MHz     23 @ 1.3 GHz     > -5 @ 6 GHz     > -15 @ 18 GHZ     > -20 @ 30 GHz
MLPNC-7103-SMT680     21 @ 800 MHz     23 @ 1.3 GHz     > -5 @ 6 GHz     > -15 @ 18 GHZ     > -20 @ 30 GHz
MLPNC7103S1-SMA800     18 @ 600 MHz     24 @ 1.5 GHz     > 0 @ 4 GHz     > -14 @ 15 GHz     N/A
MLPNC-7103S1SMT580     18 @ 600 MHz     24 @ 1.5 GHz     > 0 @ 4 GHz     > -14 @ 15 GHz     N/A
           

1 | 2  Next Page »
Featured Video
Jobs
Senior Principal Software Engineer for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Engineer 2 for Lam Research at Fremont, California
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise