Linear ReDrivers/Repeaters enable special 'link training' signals to pass though the device without any change. Preserving these special signals as they pass through the redriver is essential in allowing the platform to meet signal compliance testing that is required for platforms utilizing, for example, PCIe3, 10Gb Ethernet, or SAS3. Other benefits include easier adjustment of the redriver settings and a wider range of channel lengths for any given redriver setting. Linear redrivers are utilized on platforms such as server, storage, networking, PC/NB, and some embedded applications with protocol speeds of 8Gbps and higher.
"Pericom has worked closely with industry processor and controller IC partners to provide compliant signal integrity solutions to platform designers," said Bill Weir, Sr. Director Marketing, Pericom Semiconductor. "Our newest linear redriver family provides designers with cost effective and protocol compliant solutions to extend high speed channels on their platforms with minimum adjustment time."
Pericom's Linear ReDrivers provide programmable input equalization, linear swing and flat gain control to optimize high speed signals across the PCB trace or cable.
PI3EQX8904/ PI3EQX8908A are PCIe 3.0 compliant, 8Gbps link speed, four channel (8904) and 8 channel (8908A) and PI3EQX10904/ PI3EQX10908A are 10Gb Ethernet / KR compliant, 10Gbps link speed, four channel (10904) and 8 channel (10908A) Linear ReDrivers with link training compliant performance. Each has I2C master/slave mode controlling up to 16 redrivers from one low cost EEPROM, per channel adjustments, flow through pinouts, and space saving TQFN packages.
PI3DPX1203 is a DisplayPort 1.3 compliant, 8Gbps link speed, four differential channels Linear ReDriver with link training transparent mode. The linear mode amplifier allows full compliance to link training signals. PI3DPX1203 is ideal for USB Type-C connector sink and source-side applications with PD controllers.
PI3EQX1001/ PI3EQX1002B are low power, high performance single channel (1001) and dual channel (1002B) Linear ReDrivers/Repeaters are solutions designed specifically to extend both USB3.1 Gen1 ( 5Gbps) and USB3.1 Gen2(10Gbps) high speed signals across PCB channels and cable applications, with or without Type-C connectors.
PI3EQX1204-C is a SAS 3.0 compliant, 12Gbps link speed, and PI3HDX1204D is an HDMI 2.0 compliant, 6Gbps link speed, four differential channels Linear ReDrivers with link training transparent mode. The linear mode amplifier allows full compliance to link training signals.
Pricing & Availability
All members of the new Linear ReDriver/Repeater family offer simulation models, support, and evaluation boards. The
PI3DPX1203,
PI3EQX8904/
PI3EQX8908A,
PI3EQX10904/
PI3EQX10908A,
PI3EQX1204-C, and
PI3HDX1204D are available in production quantities with quoted leadtime, while the
PI3EQX1001/
PI3EQX1002B are sampling now, and production quantities in 1QCY16. Additional information and a volume pricing quote is available from Pericom
worldwide sales, or by
requesting a specific product price quote on pericom.com.
Complete portfolio of
ReDrivers is available
here.
About Pericom:
Pericom Semiconductor Corporation enables serial connectivity with complete solutions for computing, communications and consumer market segments. Pericom's integrated circuits (IC) and frequency control products (FCP) provide the connectivity, timing, switching, bridging and signal conditioning of high-speed signals required by today's electronic applications. Pericom is based in Milpitas, California, with design centers and technical sales and support offices around the world. Pericom is a qualified supplier to more than 100 of the world's largest (Tier 1) corporations. Pericom was recently acquired by
Diodes Incorporated (
ReDriver is a trademark of Pericom Semiconductor Corporation, all rights reserved.
Marketing Contact: Bill Weir Sr.Director, Marketing Pericom Semiconductor Milpitas, California USA 408-232-9100 Email Contact Press Contact: Gurmeet Dhaliwal Director, Marketing Communications Pericom Semiconductor Milpitas, California USA 408-232-9100 Email Contact
