EDA Consortium Reports EDA Industry Revenue Increase For Q2 2015

SAN JOSE, Calif., Sept. 28, 2015 — (PRNewswire) — The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 8.5 percent for Q2 2015 to $1906.5 million, compared to $1757.9 million in Q2 2014. The four-quarters moving average, which compares the most recent four quarters to the prior four quarters, also increased by 8.5 percent.

"The EDA Industry continues to show solid revenue growth in the second quarter, with double digit growth in semiconductor IP and services," said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. "CAE and IC physical design also reported solid growth. Geographically, all regions except Japan saw revenue increases, especially Asia/Pacific."

Companies that were tracked employed a record 32,806 professionals in Q2 2015, an increase of 4.9 percent compared to the 31,259 people employed in Q2 2014, and up 2.1 percent compared to Q1 2015.

The complete quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members of the EDA Consortium.

Revenue by Product Category
The largest category, Computer Aided Engineering (CAE), generated revenue of $657.2 million in Q2 2015, which represents a 9.6 percent increase compared to Q2 2014. The four-quarters moving average for CAE decreased 0.3 percent.

IC Physical Design & Verification revenue was $379.2 million in Q2 2015, a 6 percent increase compared to Q2 2014. The four-quarters moving average increased 10 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $155.3 million for Q2 2015 represents a decrease of 13 percent compared to Q2 2014. The four-quarters moving average for PCB & MCM decreased 3.1 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $611.7 million in Q2 2015, a 15 percent increase compared to Q2 2014. The four-quarters moving average increased 22.1 percent.

Services revenue was $103.1 million in Q2 2015, an increase of 14.7 percent compared to Q2 2014. The four-quarters moving average increased 11.5 percent.

Revenue by Region
The Americas, EDA's largest region, purchased $870.3 million of EDA products and services in Q2 2015, an increase of 9.5 percent compared to Q2 2014. The four-quarters moving average for the Americas increased 11.2 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) increased 5.2 percent in Q2 2015 compared to Q2 2014 on revenues of $305.4 million. The EMEA four-quarters moving average increased 0.7 percent.

Second quarter 2015 revenue from Japan decreased 3.4 percent to $182.8 million compared to Q2 2014. The four-quarters moving average for Japan decreased 10.4 percent.

The Asia/Pacific (APAC) region revenue increased to $548.1 million in Q2 2015, an increase of 13.2 percent compared to the second quarter of 2014. The four-quarters moving average increased 17.6 percent.

The complete MSS report, available to the EDA Consortium members, contains additional detail for countries in the Asia/Pacific region.

About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium
The Electronic Design Automation Consortium, EDAC, is the international association representing companies that develop and provide software tools, services, intellectual property and hardware that make it possible for hardware and software engineers to create the world's electronic products. EDAC's member companies deliver the critical technology and solutions needed to design and verify the semiconductors and associated software, packaging and interconnect technologies that enable the manufacturing of these products. Our member companies impact every conceivable segment of the electronics market, from communications, computers, networking, space technology, medical and industrial equipment to consumer electronics and the emerging IoT (Internet of Things) markets. For more information about the EDA Consortium, visit www.edac.org, or to join EDAC and receive the quarterly Market Statistics Service report, call 408-287-3322 or email Email Contact.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.

Press Contacts:    
Paul Cohen, EDA Consortium, 978-769-2106    
Suzanne Graham, Mentor Graphics, 503-685-7789 

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/eda-consortium-reports-eda-industry-revenue-increase-for-q2-2015-300149388.html

SOURCE EDA Consortium

Contact:
EDA Consortium
Web: http://www.edac.org

Featured Video
Jobs
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
GIS Specialist for Washington State Department of Natural Resources at Olympia, Washington
Mechanical Engineer 3 for Lam Research at Fremont, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise