Why the Greenwich Meridian Isn’t Where it Used to Be

A newly published paper now answers the question: “Why doesn’t zero longitude run through the Royal Observatory at Greenwich?”

Aug 14, 2015 -- By using a high-resolution gravitational model, a research team consisting of geodesists from the National Geospatial-Intelligence Agency (NGA), astronomers from the US Naval Observatory and the University of Virginia, and an engineer from Analytical Graphics Inc. (AGI), conclude that a slight deflection in the natural direction of gravity at Greenwich is responsible for the 102-meter offset, along with the way astronomical time was maintained over the 20th century.

 

In 1884, an international delegation convened in Washington D.C. to recommend that zero longitude pass through the Airy Transit Circle at the Royal Observatory in Greenwich, England. This telescope was used to accurately measure the rotation of the Earth, with its location established partly by the direction of local gravity. Over the twentieth century, space-age technologies replaced telescopic observations and changed the conventions for determining latitude and longitude. These conventions differ by small variations in local gravity known as “deflection of the vertical”.

“Astronomical time and longitude are inextricably linked, but astronomical measurements of time are affected by direction of gravity as well as physical location,” says John Seago, AGI’s contributor to the research. “The Greenwich meridian marker considers the location, but not the ‘up’ direction — or zenith — established by local gravity. Greenwich Mean Time, or Universal Time, was originally measured against the direction of gravity at Greenwich.”

Contrary to popular belief, GPS has nothing to do with the shift. In 1984 — before GPS was operational — the International Bureau of Time (BIH) at the Paris Observatory defined a new world-reference system to measure Earth rotation, to take advantage of highly accurate space-based technologies. The new reference system was later adopted by GPS, and it maintained Greenwich Time according to the same direction established by the Airy Transit. But because Earth-rotation was no longer measured in a way that included the effects of local gravity, zero longitude could not pass through Airy’s instrument.

“Forcing zero in the BIH system to coincide with the Airy Transit Circle could have caused a historical disruption in the Greenwich Time it was designed to measure, and it would have also caused a small shift in world-wide longitudes,” Seago says. “Yet it would be fitting to still refer to the zero-longitude line indicated by GPS as the ‘Greenwich’ meridian, because that line was established by both the location and the direction of gravity at the Greenwich observatory. Zero longitude is the origin for Greenwich Mean Time, and the GPS line is where Universal Time continues to be maintained relative to the center of the Earth.”



Read the complete story ...
Featured Video
Jobs
Senior Principal Software Engineer for Autodesk at San Francisco, California
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Equipment Engineer, Raxium for Google at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Upcoming Events
World Architecture Festival 2024 at Marina Bay Sands Singapore - Nov 6 - 8, 2024
Dimensions User Conference 2024 at The Venetian Resort Las Vegas NV - Nov 11 - 13, 2024
Greenbuild 2024 at Pennsylvania Convention Center Philadelphia PA - Nov 12 - 15, 2024
Digital Construction North (DCN) 2024 at Manchester Central. Manchester United Kingdom - Nov 13, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise