MIRI and NIRSpec, Airbus Defence and Space instruments for the James Webb Space Telescope, successfully pass cryogenic vacuum test

The Near Infrared Spectrograph (NIRSpec) and Mid-Infrared Instrument (MIRI) will contribute to observe origins of Universe. Mission to start in 2018.

Oct 13, 2014 -- The Near Infrared Spectrograph (NIRSpec), developed and built by Airbus Defence and Space, the world’s second largest space company, and the Mid-Infrared Instrument (MIRI), built by a European consortium led by the company, have successfully passed a 120 day cryogenic vacuum test campaign within the Integrated Science Instrument Module (ISIM) of the James Webb Space Telescope (JWST). This was the second of three tests at NASA’s Goddard Space Flight Center in Washington DC, and the first with all flight science instruments installed in ISIM. The NIRSpec and MIRI instruments have been provided under a European Space Agency (ESA) contract. After launch in 2018 on an Ariane 5 from Europe’s spaceport in Kourou, French Guiana, the JWST will detect and analyse the very faint light from the first stars and galaxies that formed in the Universe.

During the test campaign, supported by Airbus Defence and Space, the thermal vacuum chamber at NASA cooled the ISIM and its instruments to their operating temperatures, around 38K (-235°C) for NIRSpec and 6.7K (-266°C) for MIRI. It took about three weeks for the instruments to reach these temperatures. Then the instruments underwent dedicated functional and performance tests and extensive check-outs.

Following the completion of this test campaign, the ISIM will be put in its flight configuration. It will then be subjected to acoustic, vibration and electro magnetic compatibility testing to simulate the launch environment. The third and final ISIM thermal vacuum test will be performed in 2015, verifying that ISIM and all science instruments are working as specified before delivering ISIM to the next level of the telescope integration and testing.

NIRSpec will be capable of measuring the spectrum of up to one hundred objects simultaneously. That will enable NIRSpec to observe large samples of galaxies and stars at unprecedented depths across large swathes of the Universe and far back in time. MIRI, a combined camera and spectrograph for mid-infrared wavelengths, will extend JWST’s observation capabilities to longer wavelengths than covered by its other instruments, vital for the study of light from objects in the early universe or to peer inside dust clouds where stars and planetary systems are forming today.

“Our instruments represent the pinnacle of technology for modern astronomy,” said François Auque, Head of Space Systems. “JWST will be hugely important in expanding our understanding of how our universe evolved. Especially NIRSpec is further proof of Airbus Defence and Space’s unrivalled expertise. We are proud to be supporting the scientific research that JWST will carry out.”

NASA, ESA, and the Canadian Space Agency (CSA) are collaborating to develop JWST, which will replace the legendary Hubble telescope and enable observation and measurement of infrared wavelengths. JWST will be able to study key phases in the evolution of the Universe in great detail – from the first stars and galaxies to form after the Big Bang to the formation of planetary systems in our own Milky Way galaxy today. This will be made possible by JWST’s suite of four highly-sensitive scientific instruments and its huge primary mirror made of 18 hexagonal segments spanning a total of six and a half metres in diameter. JWST will be the largest astronomical telescope in space.

Contacts:                                                                                          

Astrid Emerit              + 33 1 39 06 89 43                Email Contact

Jeremy Close             + 44 14 38 77 38 72               Email Contact

Gregory Gavroy          + 33 1 39 06 89 42                Email Contact

Ralph Heinrich            + 49 89 607 33971                 Email Contact

Francisco Lechón       + 34 91 586 37 41                  Email Contact

 

Featured Video
Jobs
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise