Cadence and QNX Announce New Tensilica HiFi Audio/Voice DSP Application for In-Car Active Noise Control

SAN JOSE, Calif., June 23, 2014 — (PRNewswire) —  Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation, and QNX Software Systems, a subsidiary of BlackBerry and a world leader in software platforms for in-car electronics, today announced that QNX has ported its QNX® Acoustics for Active Noise Control (ANC) software to the Cadence® Tensilica® HiFi Audio/Voice digital signal processing (DSP) core. The Tensilica HiFi Audio/Voice DSP from Cadence is available immediately.

Cadence Logo

QNX Acoustics for ANC is a high-performance software solution for reducing unwanted engine noise inside passenger vehicles. Compact and efficient, it can run on a DSP core in the vehicle's infotainment system or audio amplifier, eliminating the dedicated hardware of conventional ANC solutions. QNX Acoustics for ANC provides up to 20dB noise power reduction, depending on the transducer and vehicle seating configuration, and can be used with any of Cadence's HiFi Audio/Voice DSP IP cores.

"Modern fuel-saving techniques, such as deactivating cylinders when engine load is light, can cause irritating 'boom' noise that distracts the driver. QNX Acoustics for ANC generates targeted anti-noise over the car's audio system to cancel out this boom for a more enjoyable ride," stated Peter McCarthy, director of global alliances, QNX Software Systems. "By combining QNX Acoustics for ANC with the widely deployed Cadence Tensilica HiFi Audio/Voice DSP core, system designers can reduce engine noise while also eliminating the costs associated with designing and prototyping a custom hardware controller module."

"Automotive OEMs and Tier 1 head-unit suppliers can now incorporate QNX Acoustics for ANC with HiFi DSP-based SoCs, providing a quieter and more relaxed driving experience," said Larry Przywara, Cadence's group director of audio/voice intellectual property (IP) marketing. "The Tensilica HiFi Audio/Voice DSP core is an ideal match for QNX Software Systems' ANC software, and we look forward to supporting our joint customers with a high-performance solution."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available here.

About QNX Software Systems

QNX Software Systems Limited, a subsidiary of BlackBerry Limited (NASDAQ:BBRY; TSX:BB), is a leading vendor of operating systems, automotive software, development tools, and professional services for connected embedded systems. Global leaders such as Audi, Cisco, General Electric, Lockheed Martin, and Siemens depend on QNX technology for vehicle infotainment units, network routers, medical devices, industrial automation systems, security and defense systems, and other mission- or life-critical applications. Founded in 1980, QNX Software Systems is headquartered in Ottawa, Canada; its products are distributed in more than 100 countries worldwide. Visit www.qnx.com, follow @QNX_News on Twitter, and visit www.facebook.com/QNXSoftwareSystems. For updates on the company's automotive work, follow @QNX_Auto and visit qnxauto.blogspot.com.

© 2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Tensilica and the Cadence logo are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. QNX is a trademark of BlackBerry Limited, is registered and/or used in certain jurisdictions, and used under license by QNX Software Systems Limited. All other trademarks are the property of their respective owners.

QNX Software Systems Limited (QSS) is a subsidiary of BlackBerry Limited. Forward-looking statements in this news release are made pursuant to the "safe harbor" provisions of the U.S. Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When used herein, words such as "expect", "anticipate", "estimate", "may", "will", "should", "intend", "believe", and similar expressions, are intended to identify forward-looking statements. Forward-looking statements are based on estimates and assumptions made by QSS in light of its experience and its perception of historical trends, current conditions, and expected future developments, as well as other factors that QSS believes are appropriate in the circumstances. Many factors could cause QSS's actual results, performance, or achievements to differ materially from those expressed or implied by the forward-looking statements, including those described in the "Risk Factors" section of BlackBerry's Annual Information Form, which is included in its Annual Report on Form 40-F (copies of which filings may be obtained at www.sedar.com or www.sec.gov). These factors should be considered carefully, and readers should not place undue reliance on QSS's forward-looking statements. BlackBerry and QSS have no intention and undertake no obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law. QSS is not responsible for and assumes no obligations or liability and makes no representation, warranty, endorsement, or guarantee in relation to any aspect of any third-party products or services.

Cadence Newsroom

Paul Leroux, QNX Software Systems

408-944-7039

613-591-0931

newsroom@cadence.com  

paull@qnx.com

Photo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO

SOURCE Cadence Design Systems, Inc.

Contact:
Cadence Design Systems, Inc.
Web: http://www.cadence.com

Featured Video
Jobs
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Equipment Engineer, Raxium for Google at Fremont, California
GIS Specialist for Washington State Department of Natural Resources at Olympia, Washington
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise