Surgeon Performs First Mazor Robotics Renaissance® Spine Surgery with Full Integration of Intraoperative Imaging System

ORLANDO, Fla., — (BUSINESS WIRE) — May 6, 2014 — Dr. Dimitry Dzukaev performed a series of 10 successful spine procedures utilizing Mazor Robotics (TASE: MZOR; NASDAQGM: MZOR) Renaissance Guidance System with full integration of an intraoperative imaging system in Moscow, Russia at City Clinical Hospital No. 67. The CT scanner (Neurologica’s Body Tom®) images were uploaded directly to Renaissance’s 3D software in the operating room and the procedures were completed without the use of any fluoroscopy.

“Renaissance’s ability to integrate with intraoperative imaging will allow me to improve efficiency in the operating room with the comfort of consistent accuracy that the technology provides,” said Dr. Dzukaev in Moscow.

“While continuously working with our customers, we identified a need to allow integration between the Renaissance system and intraoperative imaging platforms,” said Mazor Robotics CEO Ori Hadomi. “We are committed to continually improving and advancing the Renaissance technology for our surgeons.”

To date, Mazor Robotics Renaissance Guidance System has been used to place over 45,000 implants in thousands of spine procedures worldwide, ranging from minimally-invasive one-level fusions to complex deformity reconstructions. Published clinical papers have shown increased accuracy rates with Mazor Robotics technology, including a study in European Spine Journal reporting 98.9 percent accuracy when implanting pedicle screws using the Renaissance system in a study group of 101 consecutive cases.1

Mazor Robotics is dedicated to the development of innovative surgical guidance systems and complementary products that provide a safer environment for patients, surgeons, and operating room staff. For more information, please visit www.mazorrobotics.com.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1995 and other Federal Securities laws. Any statements in this release about future expectations, plans or prospects for Mazor, including without limitation, statements regarding the benefits of Renaissance and its ability to integrate with intraoperative imaging systems, and other statements containing the words “believes,” “anticipates,” “plans,” “expects,” “will” and similar expressions are forward-looking statements. These statements are only predictions based on Mazor's current expectations and projections about future events. There are important factors that could cause Mazor's actual results, level of activity, performance or achievements to differ materially from the results, level of activity, performance or achievements expressed or implied by the forward-looking statements. Those factors include, but are not limited to, the impact of general economic conditions, competitive products, product demand and market acceptance risks, reliance on key strategic alliances, fluctuations in operating results, and other factors indicated in Mazor's filings with the Securities and Exchange Commission (SEC) including those discussed under the heading “Risk Factors” in Mazor’s annual report on Form 20-F and in subsequent filings with the SEC. For more details, refer to Mazor’s SEC filings and the amendments thereto. Mazor undertakes no obligation to update forward-looking statements to reflect subsequent occurring events or circumstances, or to changes in our expectations, except as may be required by law.

1. Hu, X, Ohnmeiss D. Lieberman,I. Robotic-assisted pedicle screw placement: lessons learned from the first 102 patients. Eur Spine J (2013) 22:661-666.



Contact:

Mazor Robotics, Inc.
Stephani Shipman, 407-591-3461
Marketing Communications Manager
Email Contact

Featured Video
Jobs
Principal Engineer for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Business Development Manager for Berntsen International, Inc. at Madison, Wisconsin
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise