IXYS Introduces the PIM-Mini 5A to 200A Miniature Pulsed Laser Diode Driver

FORT COLLINS, Colo. — (BUSINESS WIRE) — April 15, 2014 — IXYS Corporation (NASDAQ: IXYS), a leader in power semiconductors, mixed-signal and digital ICs for power conversion and motion control applications, announced today the introduction of the compact and lightweight PIM-Mini by its IXYS Colorado division. The PIM-Mini is an air-cooled pulsed current source designed to drive laser diodes, bars, arrays, or any low-impedance load.

Offered in models from 5 amperes to 200 amperes of peak current at up to 48 volts forward voltage, the PIM-Mini has been optimized for OEM designs including industrial, chemical processing and medical applications. Its size and flexibility makes it ideal for research, laboratory, scientific and other applications requiring a compact and economical high-performance pulsed driver.

Pulse widths are adjustable from 25 microseconds to 8,750 microseconds (maximum pulse width varies by model), with a pulse repetition frequency up to 20 hertz. Output current is set with an internal potentiometer or an analog voltage. The pulse width is controlled with the input trigger signal. It requires two DC voltages for operation, 12 volts support power and a compliance voltage equal to 12 volts above the laser diode’s forward voltage.

PIM-Mini Features:

  • Five models available with maximum output current of 5, 10, 20, 50 and 200 amperes
  • Rise and fall times of 5 to 10 microseconds, depending upon model
  • Pulse widths from 25 to 8,750 microseconds (maximum pulse width varies by model)
  • Drives both single diodes and arrays with forward voltages up to 48 volts
  • Miniature air-cooled module just 4.425” H x 4.975” W x 2.125” D (112 x 126 x 54 millimeters) in size, ideal for OEM applications
  • 12 volt DC support power – no AC mains input needed
  • RoHS compliant

“We are excited to be releasing the PIM-Mini, the next product in our strategy to provide our customers with pulser solutions covering all requirements from R&D and laboratory bench top systems to application-specific OEM solutions,” said Stephen Krausse, General Manager of IXYS Colorado/DEI. “Leveraging our pulse power solutions and design expertise provides our customers with the competitive advantages of a shortened time-to-market and optimal performance of their end products.”

The PIM-Mini is available directly from IXYS Colorado (Directed Energy) Tel. (970) 493-1901, Fax (970) 232-3025, Email sales@ixyscolorado.com, http://www.ixyscolorado.com or through your local authorized IXYS/IXYSRF sales representative.

About IXYS

IXYS Corporation develops and markets primarily high performance power semiconductor devices that are used in controlling and converting electrical power efficiently in power systems for the telecommunication internet infrastructure, motor drives, medical systems, solar energy, wind energy, electrical generators and transportation. IXYS also serves its markets with a combination of digital and analog integrated circuits, RF power products and power subsystems including application-specific, embedded system-on-chip (SoC) solutions for the industrial and consumer markets.

Safe Harbor Statement

Any statements contained in this press release that are not statements of historical fact, including the performance, rating, availability, reliability, operation and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-Q for the fiscal quarter ended December 31, 2013. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.



Contact:

IXYS Corporation
Jacque Laguna, 970-493-1901
Email Contact

Featured Video
Latest Blog Posts
Sanjay GangalAECCafe Today
by Sanjay Gangal
AEC Industry Predictions for 2025 — vGIS
Sanjay GangalIndustry Predictions
by Sanjay Gangal
AEC Industry Predictions for 2025 — QeCAD
Jobs
Business Development Manager for Berntsen International, Inc. at Madison, Wisconsin
Upcoming Events
Consumer Electronics Show 2025 - CES 2025 at Las Vegas Convention Center Las Vegas NV - Jan 7 - 10, 2025
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
Geospatial World Forum 2025 at Madrid Marriott Auditorium Madrid Spain - Apr 22 - 25, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise