Cadence Launches Palladium XP II Verification Platform and Enhanced System Development Suite

SAN JOSE, CA -- (Marketwired) -- Sep 09, 2013 -- Cadence Design Systems, Inc. (NASDAQ: CDNS)

Highlights:

  • Palladium XP II platform delivers 2X increase in verification productivity, resulting in up to four months faster time to market
  • Enhanced System Development Suite delivers up to 60X speed-up for embedded OS verification and 10X performance increase in hardware/software verification

In a move to further reduce time to market for both semiconductor and system manufacturers, Cadence Design Systems, Inc. (NASDAQ: CDNS) today introduced the Palladium® XP II Verification Computing Platform as part of an enhanced System Development Suite, significantly speeding up hardware and software verification. The Palladium XP II platform builds on the award-winning Palladium XP emulation technology by boosting verification performance by up to 50% and extending its industry-leading capacity to 2.3 billion gates. With reduced power and increased gate density, customers can now run larger payloads in a smaller footprint, reducing overall cost of ownership. Cadence has also added support for eight new mobile and consumer protocols for simulation acceleration. Read more at cadence.com/PXPII

Given the growing need for early, fast, and accurate hardware/software verification, Cadence expanded the capabilities of its System Development Suite centered around Palladium, adding:

  • Patent-pending hybrid technology, which combines the Cadence® Virtual System Platform with the Palladium XP series to deliver up to 60X speed-up for embedded OS verification and 10X performance speed-up for hardware/software verification.
  • Embedded test bench for advanced virtualization of system environments, enabling users to verify peripheral software drivers prior to tape-out, resulting in faster post-silicon bring-up.

"In our latest update of the highly contested Transaction Based Acceleration market for 2012 Cadence continues to be the market leader," said Gary Smith, chief analyst at GSEDA. "The new upgraded hardware capabilities of Palladium XP II platform and the additional advanced use models position Cadence well to address the ever increasing system to verification challenges users are facing."

Palladium Customers Speak Out

"With the Cadence Palladium Virtual System Platform hybrid solution, we experienced up to 60X speed-up of OS bring-up over pure in-circuit emulation combined with up to 10X performance improvement for production and test software executing on top of the OS interacting with accurate hardware representations in the Palladium platform," said Narendra Konda, director of engineering at NVIDIA. "This new use model significantly improves NVIDIA's system software validation cycle and ensures a smoother post-silicon bring-up."

"Using the Palladium platform and its embedded test bench use model, we uncovered critical issues and resolved them prior to tape out, using models of peripheral devices that are connected to the SoC as part of a fully synthesizable embedded test bench," said Vahid Ordoubadian, director of IC Engineering, Mobile Platform Solutions at Broadcom Corp. "As a result, we experienced faster bring-up for a new SoC architecture and were able to run initial tests in less than a day."

"Our ability to offer production-level software along with our SoC is key to our time to market goals, because we do not ramp revenue until that software is ready," said Kent Goodin, executive vice president of engineering at Zenverge. "The Palladium XP II platform allows our software teams to develop production-worthy code prior to the IC's mask release and arrival of the prototype. This has allowed Zenverge to engage with customers at least six months earlier than would be possible without the co-development aspects of the Palladium XP II platform's emulation solution."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available here.

© 2013 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Incisive, Palladium, and the Cadence logo are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=2399829

Add to Digg Bookmark with del.icio.us Add to Newsvine

For more information, please contact:
Cadence Newsroom
408-944-7226

newsroom@cadence.com 


Featured Video
Latest Blog Posts
Sanjay GangalAECCafe Today
by Sanjay Gangal
AEC Industry Predictions for 2025 — vGIS
Sanjay GangalIndustry Predictions
by Sanjay Gangal
AEC Industry Predictions for 2025 — QeCAD
Jobs
Business Development Manager for Berntsen International, Inc. at Madison, Wisconsin
Upcoming Events
Consumer Electronics Show 2025 - CES 2025 at Las Vegas Convention Center Las Vegas NV - Jan 7 - 10, 2025
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
Geospatial World Forum 2025 at Madrid Marriott Auditorium Madrid Spain - Apr 22 - 25, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise