Xilinx and TEKTELIC Reduce Cellular Radio Infrastructure Development Time with Scalable IP and High Performance Transceiver

Streamlined development of 2G, 3G and 4G radio access systems with high performance analog wideband transceiver and advanced radio IP

SAN JOSE, Calif., Feb. 21, 2013 — (PRNewswire) — �Xilinx, Inc., (NASDAQ: XLNX) today announced the availability of a high performance development solution for designing next-generation heterogeneous wireless networks, such as high-end picocells, microcells, macrocells, and active antenna arrays. Wireless system designers using TEKTELIC's high performance, high dynamic range, wideband transceiver with Xilinx's scalable radio IP cores greatly increase design team productivity to help customers move a generation ahead.

The availability of the Xilinx® scalable digital front end (DFE) IP cores covering Digital Up and Down (DUC/DDC) Conversion, Crest Factor Reduction (CFR) and Digital Pre-Distortion (DPD) operating on a standard Xilinx FMC evaluation board connected to TEKTELIC's wideband radio transceiver allows equipment designers to evaluate Xilinx's radio IP with their power amplifier equipment, or prototype and develop their own IP on Xilinx devices. TEKTELIC's transceiver provides a high performance RF and mixed signal transmitter and an observation receiver that supports all cellular air interface standards, including the challenging Multi-Carrier GSM standard.

"The combination of the DFE IP and transceiver enables customers to rapidly develop solutions for emerging heterogeneous wireless networks where requirements differ based on whether the system is a picocell, microcell, macrocell or active antenna array," said David Hawke, director of wireless product marketing at Xilinx. "The IP can uniquely scale to meet these requirements to offer low cost, low power and high performance in 28nm silicon, while offering a significant time-to-market advantage through reduced development times."

With a large number of base stations being developed worldwide, coupled with multiple air interface standards, and many geographic frequencies, OEMs are looking for ways to lower costs, increase flexibility, leverage scalability and get to market quickly. The TEKTELIC high performance wideband transceiver supports Class 1 MC-GSM up to 60 MHz transmission bandwidth, allowing customers to rapidly prototype these high performance multi-mode systems.

"Increasing RF performance and bandwidth are key to future radio system design, but it is a significant challenge to achieve the high performance demanded by MC-GSM over such wide bandwidths demanded by present Multi-RAT systems. MC-GSM in particular requires dynamic range exceeding those of 3G and 4G systems," said David Tholl, CTO at TEKTELIC. "TEKTELIC's new wideband transceiver has achieved class leading performance to enable rapid development of these high performance systems in conjunction with Xilinx boards and IP."

Availability

Visit the TEKTELIC website for technical detail and purchase information for the Radio Development Board. To learn more about the Xilinx Radio IP visit http://www.xilinx.com/esp/wireless/refdes_listing.htm

About TEKTELIC Communications

TEKTELIC Communications develops leading edge small cell wireless Base Stations, wireless Backhaul Systems, high power Radios and Power Amplifiers that address 3G and 4G Service Provider coverage and rapidly growing data requirements. TEKTELIC'S innovative products include very compact form factor Base Stations, wireless Backhaul Systems, high power and high efficiency Remote Radio Heads (RRHs), Shelf Mount Radios (SMR), and Power Amplifiers. TEKTELIC products are differentiated by high quality, and compact size making them easy to deploy and simple to maintain.

About Xilinx

Xilinx is the world's leading provider of All Programmable FPGAs, SoCs and 3D ICs. These industry-leading devices are coupled with a next-generation design environment and IP to serve a broad range of customer needs, from programmable logic to programmable systems integration. For more information, visit www.xilinx.com.

#1309

#AAB851

XILINX, the Xilinx Logo, Virtex, Zynq, Vivado, Zynq and other designated brands included herein are trademarks of Xilinx in the United States and other countries. All other trademarks are the property of their respective owners.

Xilinx

Silvia E. Gianelli

(408) 626-4328

silvia.gianelli@xilinx.com


SOURCE Xilinx, Inc.

Contact:
Xilinx, Inc.
Web: http://www.xilinx.com

Featured Video
Jobs
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Business Development Manager for Berntsen International, Inc. at Madison, Wisconsin
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise