Whole Building Systems Completes Energy Survey and Engineering Analysis of Nathaniel Russell House Museum in Historic Charleston, SC

Findings Were Presented at the Sustainability & Southern Historic Preservation Conference

CHARLESTON, S.C. — (BUSINESS WIRE) — February 21, 2013Whole Building Systems, a highly regarded engineering and energy efficiency consulting firm that serves commercial, governmental, educational, and historic preservation sectors, today announced that it recently completed an Energy Survey and Engineering Analysis of the Nathaniel Russell House Museum, located in historic Charleston, SC.

The findings of Whole Building Systems (WBS) analysis were made public at the recent Sustainability & Southern Historic Preservation Conference, and M. Dennis Knight, PE, CxA – Whole Building Systems’ CEO – made the presentation, which focused on the balance that must be struck between historic building preservation and contemporary technologies for heating and cooling.

As part of Whole Building Systems’ Energy Survey and Engineering Analysis, Mr. Knight reviewed the challenges presented by an HVAC retrofit for an historic, 9,600 square foot structure that was built in 1808, when mechanical heating and cooling systems did not even exist. Whole Building Systems’ analysis involved an ASHRAE Level I “walk-through,” audit as well as a review of preliminary energy use. As the work progressed, an ASHRAE Level II Audit (including a Trane Trace energy model) and a Level III Investment Grade Analyses were conducted to understand the scope and lifecycle costs of capital-intensive modifications.

Whole Building Systems’ findings revealed that an inability to effectively control humidity led staff to keep the house colder than necessary. That combined with air leakage was contributing to increased energy consumption, occupant discomfort, and less than ideal interior conditions.

Whole Building Systems recommended that the Nathaniel Russell House Museum replace the existing HVAC system with a similar but more-efficient chilled-water / hot-water system; that the building should be weatherized; and that the building automation system should undergo an upgrade. These changes would result in proper humidity and temperature regulation, which is necessary to protect the museums collection and the house itself. WBS then designed the new system so that it could be installed with minimal impact to the structure.

“The challenge at the Nathaniel Russell House was balancing energy efficiency and the preservation of one of America’s most valuable historic structures. The Nathaniel Russell House Museum will stand for another 200 years, but the mechanical system will likely last only thirty," said Whole Building Systems’ M. Dennis Knight. “Our recommendations will not only make the staff and visitors more comfortable, but they help preserve significant cultural resources for future generations.”

“This was a major undertaking by HCF and we relied heavily on WBS’ technical expertise and depth of knowledge on energy efficiency in historic structures,” said Winslow Hastie Chief Preservation Officer at HCF. “WBS worked hard to achieve that delicate balance of protecting cultural assets with the comfort and well being of the buildings occupants.”

About WBS Founder and CEO, M. Dennis Knight

Mr. Knight is an ASHRAE Distinguished Lecturer, and he is a globally renowned expert on energy performance, historic preservation, and building information modeling (BIM). He recently published an article entitled BIM Object Creation in the peer-review ASHRAE Journal, and he has just returned from a multi-country lecture tour in South Asia, where he spoke on advanced building information modeling.

About Whole Building Systems

An engineering and energy-efficiency consulting firm, Whole Building Systems’ goal is to motivate property owners and caretakers to create safe, comfortable buildings whose construction and operation are guided by environmental principles. While helping our clients reduce costs and increase productivity, Whole Building Systems also creates strategies, streamlines processes, and inspires people and organizations to become more energy efficient. Whole Building Systems serves a wide array of clients and building types, including the commercial, governmental, educational, and historic preservation sectors. Our staff is highly credentialed and has demonstrated mastery of USGBC LEED rating systems, EPA Energy Star, ASHRAE BeQ, and much more. Additionally, Dennis Knight recently earned the Building Energy Modeling Professional ( BEMP) certification from ASHRAE, which attests to an individual’s ability to evaluate, choose, use, calibrate, and interpret the results of energy-modeling software when applied to building and systems-energy performance and economics. www.WholeBuildingSystems.com; Contact: Susan Collins (843) 864-7716.



Contact:

For Whole Building Systems
John D. Wagner, 919-796-9984
Email Contact

Featured Video
Jobs
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise