NASA Launches New Earth Observation Satellite to Continue 40-Year Legacy

February 12, 2013 -- WASHINGTON -- NASA's Landsat Data Continuity Mission (LDCM) roared into space at 1:02 p.m. EST (10:02 a.m. PST) Monday aboard an Atlas V rocket from Vandenberg Air Force Base in California. 

The LDCM spacecraft separated from the rocket 79 minutes after launch and the first signal was received 3 minutes later at a ground station in Svalbard, Norway. The solar arrays deployed 86 minutes after launch, and the spacecraft is generating power from them. LDCM is on course to reach its operational, sun-synchronous, polar orbit 438 miles (705 kilometers) above Earth within two months. 

"Landsat is a centerpiece of NASA's Earth Science program, and today's successful launch will extend the longest continuous data record of Earth's surface as seen from space," NASA Administrator Charles Bolden said. "This data is a key tool for monitoring climate change and has led to the improvement of human and biodiversity health, energy and water management, urban planning, disaster recovery and agriculture monitoring -- all resulting in incalculable benefits to the U.S. and world economy." 

LDCM will go through a check-out phase for the next three months. Afterward, operational control will be transferred to NASA's mission partner, the Department of the Interior's U.S. Geological Survey (USGS), and the satellite will be renamed Landsat 8. Data will be archived and distributed free over the Internet from the Earth Resources and Science (EROS) center in Sioux Falls, S.D. Distribution of Landsat 8 data from the USGS archive is expected to begin within 100 days of launch. 

LDCM is the eighth in the Landsat series of satellites that have been continuously observing Earth's land surfaces since 1972. 

"Landsat has been delivering invaluable scientific information about our planet for more than forty years," Interior Secretary Ken Salazar said. "It's an honor to be a part of today's launch to ensure this critical data will continue to help us better understand our natural resources and help people like water managers, farmers, and resource managers make informed decisions." 

The use of Landsat data been transformed in recent years by advancements in computing power and the decision by USGS to allow free online access to the information. This revolution has allowed scientists to detect changes over time to our planet and has enabled a host of applications based on Landsat measurements to be developed by researchers, the private sector, and state, local, and tribal governments. 

LDCM continues that legacy with more and better observations. The spacecraft carries two instruments, the Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS). The measurements will be compatible with data from past Landsat satellites, but the LDCM instruments use advanced technology to improve reliability, sensitivity, and data quality. 

"LDCM is the best Landsat satellite ever built," said Jim Irons, a LDCM project scientist at NASA's Goddard Space Flight Center in Greenbelt, Md. "The technology will advance and improve the array of scientific investigations and resource management applications supported by Landsat images. I anticipate new knowledge and applications to emerge with an increasing demand for the data." 

OLI will continue observations currently made by Landsat 7 in the visible, near infrared, and shortwave infrared portions of the electromagnetic spectrum. It also will take measurements in two new bands, one to observe high-altitude cirrus clouds and another to observe atmospheric aerosols as well as water quality in lakes and shallow coastal waters. OLI's new design has fewer moving parts than instruments on previous Landsat satellites. 

TIRS will collect data on heat emitted from Earth's surface in two thermal bands, as compared with a single thermal band on previous Landsat satellites. These thermal band observations are becoming increasingly vital to monitoring water consumption, especially in the arid western United States. 

On Monday afternoon, Bolden will tour Vandenberg's Space Launch Complex-4, which is home to a new Space Exploration Technologies (SpaceX) launch pad. The pad is nearing completion to support SpaceX launches beginning in 2013. NASA's first use will be in 2015 with the launch of the Jason-3 mission, which will precisely measure sea surface height on Earth to monitor ocean circulation and sea level. SpaceX is the newest American company to demonstrate the capability to launch science missions for NASA and other government agencies. Jason-3 will be developed and operated as part of an international effort led by the National Oceanic and Atmospheric Administration. Bolden also will see the Orbital Sciences Pegasus rocket, being readied at Vandenberg, for the launch this April of NASA's Interface Region Imaging Spectrograph (IRIS) heliophysics mission. 

Ball Aerospace & Technologies Corp. built the OLI instrument in Boulder, Colo. NASA's Goddard Space Flight Center built the TIRS instrument. Orbital Sciences Corporation built, integrated, and tested the spacecraft in Gilbert, Ariz. USGS provided the LDCM ground system. The launch was managed by NASA's Launch Services Program based at the agency's Kennedy Space Center in Florida. United Launch Alliance provided the Atlas V launch vehicle. 

For more information about LDCM, visit: 

http://www.nasa.gov/landsat

and

http://landsat.usgs.gov

Steve Cole 
Headquarters, Washington           
 202-358-0918 
Email Contact 
  
George Diller 
Kennedy Space Center, Fla. 
321-867-2468 
Email Contact 
  
Rani Gran 
Goddard Space Flight Center, Greenbelt, Md. 
301-286-2483 
Email Contact 
Feb. 11, 2013
 

Featured Video
Jobs
Senior Principal Software Engineer for Autodesk at San Francisco, California
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Upcoming Events
Digital Twins 2024 at the Gaylord National Resort & Convention Center in, MD. National Harbor MD - Dec 9 - 11, 2024
Commercial UAV Expo 2025 at Amsterdam Netherlands - Apr 8 - 10, 2025
Commercial UAV Expo 2025 at RAI Amsterdam Amsterdam Netherlands - Apr 8 - 11, 2025
BI2025 - 13th Annual Building Innovation Conference at Ritz-Carlton Tysons Corner McLean VA - May 19 - 21, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise